I have finally received my Buccaneer Pirate 3D printer and just started playing around with it. Got off a shaky start of broken filaments and poor adhesion of the layers, but all is resolved through the easy to understand re-calibration instructions and various youtube videos from the homepage.
One other problem remains though, and that is the difficulty of removing the final product from the print bed! Sounds like a good problem to have as it usually means the model came out well, but after a few times of brute-force prying the printed model and scraping the remaining debris off the sticky print bed, it is soon apparent that this is not the way to go for long as the adhesive print bed is taking too much damage.
Surfed around the net a bit, realised that for PLA filaments, two cheap solutions exists, and this instructable is to share with you the stuffs i learnt and discovered along the way and also the experience of using the two methods:
1) Using glue stick
2) Using blue painter's tape
For detailed step-by-step process, please click below instructable link: